Selecting-a-Suitable-LED-Driver-for-Your-LED-Strip-Lights

From Hikvision Guides
Jump to: navigation, search

Nowadays we are answering one more one particular of your FAQs, this time relating to the topic of LED Drivers.

As LED Strip Lights have voltage and existing needs which are different to the mains power supply (240V AC), they need a individual device known as an LED Driver in buy to perform.

What is an [httpswww.ukled.co.ukled-drivers.html LED Driver] ?

An LED Driver, occasionally referred to as a transformer or electricity supply, is a self-contained electrical power offer that matches its output to the voltage and present needs of the system it serves. Working on a equivalent basis to the 12V transformers in MR16 highlight methods, the LED Driver will take the mains electricity source and alterations it to 12V DC.

Which LED Driver do I require?

Drivers arrive in numerous designs and sizes, and not all will be appropriate for your functions. When picking a driver you should contemplate the following:

-The electricity outlet you are using

-The dimension of your LED Strip Lights.

LED Drivers appear in two main types "plug and enjoy" and mains completely ready.

As the identify indicates, "plug and play" motorists are created for swift and easy set up, and call for minimal skills to use. The driver connects to the mains supply via a normal Uk 3-pin plug and to the strip lights through corresponding male and woman connectors.

Mains ready motorists are created for a lot more superior installations and can be hardwired directly into your household mains, usually by way of a domestic family change for a fully integrated lights experience. An IP67 ratingalso tends to make them ideal for use in soaked and damp problems.

As well as the type, you will also have to select a suitably sized driver. The size of the driver is measured in watts and requirements to be matched to the power consumption, or "load," of your LED Strip Lights.

To determine the load of your strip lights, multiply the wattage for every metre by the whole number of metres you intend to operate off a one driver. This can be expressed as follows:

wattage for every metre x number of metres = total electricity intake (load)

For instance, if you are employing 10 metres of LED Strip Gentle that consumes 7.2 watts for every metre, the entire load will be ten x seven.two = seventy two watts. In this certain example an a hundred watt driver will be sufficient.

Bear in mind, it is achievable to run much more than 1 strip mild off a one driver. Usually check with a skilled electrician ahead of making an attempt any mains electrical work.